El EnviroLog es un registrador de temperatura de un solo uso, rentable y fiable, con un conector USB integrado. Mide y almacena lecturas de temperatura en tiempo real en un rango de medición de -30 °C a +70 °C.
El EnviroLog genera automáticamente un informe en PDF que no requiere ningún software especial y combina todas las características de un registrador de temperatura avanzado con una memoria de 16.000 registros y una vida útil de 6 meses.
| Temperature Sensor Measurement range |
-30 °C to +70 °C (-22 °F to +158 °F) |
| Recorder operating temperature range |
-30 °C to +70 °C (-22 °F to +158 °F) |
| Storage Temperature Range |
0 °C to +40 °C (32 °F to +104 °F) |
| Rated Temperature reading accuracy |
Better than ±0.5°C (±0.9°F) for -5°C to +30°C (23°F to +86°F). Better than ±0.8°C or better for measurements in other areas of rated range. Actual performance is typically much better than the rated values. Accuracy figures can be improved by recalibration |
| Rated Temperature Reading Resolution |
Better than 0.1°C or 0.1°F. The native resolution is what is stored in the EnviroLog ® |
| Sensor Reaction Time |
Typically less than 7 minutes (T90) in moving air (1m/s) in EN12830:1999 |
| Recording Capacity |
16,129 temperature readings. 112 days @ 10min logging, 168 days @ 15min logging |
| Alarms |
Up to 3 upper and 3 lower alarms depending on preset configuration |
| Download Time |
Typically in less than 30 seconds from time of insertion to availability of PDF report |
| Environmental |
IEC 60529: IP67 when plastic intact |
| Power source |
CR2032 LiMnO2 Battery (Fixed) |
| Battery Life |
2 years storage, followed by 6 months battery life of normal use (based on 6 minute logging, download data monthly) |
| Real Time Clock |
Built-in real time clock. Rated accuracy ±25ppm @ 25°C (equivalent to 2.5 seconds/day). Rated temperature coefficient is -0.034 ±0.006ppm/°C (I.e typically +/- 0.00294 seconds/day/°C) |
| Connection Interface |
USB 2.0, A-type plug |
| Software |
PDF Reader |
| Size |
93mm(H) x 54.5mm(W) x 8.6mm(T) |
| Weight |
31g |
| Sampling Interval |
Preset recording interval from 30 seconds to 18 hours (Typically 5 minute logging) |
| Logging Start Options |
Push button start. Optional start delay (1min to 72 hours) depending on preset configuration |
| Recording Indication |
Flashing ‘OK’ indicator / flashing ‘ALERT’ indicator |
| Case Material |
LDPE /ABS |
| EN12830 |
EN 12830:2018 - Temperature recorders for the transport, storage and distribution of temperature sensitive goods - Test, performance, suitability |
English
Bulgarian
German
French
Greek
Italian
Romanian
Turkish