Protective Enclosure

The LogTag® Protective Enclosure is specifically designed for LogTag® recorder products to allow use in harsh environments.


The LogTag® Protective Enclosure is specifically designed for LogTag® recorder products to allow use in harsh environments.

Highlights

  • IP67 – Dust & Waterproof resistant
  • Clear, high impact polycarbonate plastic case material
  • Supports all non-External Probe products.

The LogTag® Protective Enclosure is specifically designed for LogTag® recorder products to allow use in harsh environments.

The design of the enclosure minimises the effects of thermal lag caused by the additional casing. In general, the enclosure adds about 70% to the reaction time to temperature change for a given environment.

The enclosure’s case is made from high impact polycarbonate plastic and is clear to allow viewing of the enclosed recorder’s LCD or indicators. Conservatively rated at IP67 (equivalent to NEMA6).

Supports LogTag® TRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8, USRIC-8 products.

Storage Temperature Range -40°C ~ +85°C
Environmental IP67 (equivalent to NEMA6) for temperatures 1°C~+40°C
Size 104mm (L- not including lug) x 76.5mm (W - including clips and hinge) x 13mm D
Weight 41 g
Case Material Clear Polycarbonate with silicon rubber seal
LogTag® part code 200-000020
LogTag® models supported TRID30-7x, TRIX-8/16, SRIC-4, TRIL-8/SRIL-8, USRIC-8
Chemical resistance In general the polycarbonate material can withstand alcohols and diluted acids well. Problems can occur with hydrocarbons, phenols, esters, ketones and alkalis especially at elevated temperatures
T90 thermal performance With TRIX-8 in 1 m/s air : T90 = ~ 10 minutes. With TRID30-7x in 1 m/s air : T90 = ~ 17minutes